VEMCO – VR4-UWM Manual
49
1.
Download the latest VUE software from
http://www.vemco.com/downloads/
2.
Communicate with the VR4-UWM receiver (section 2.4).
3.
Click the red and blue “Start Recording” button found in the
receiver tab’s ribbon. If you have more than one receiver connected
to VUE, then make sure you have the tab of the desired receiver
selected.
4.
Verify that the PC clock is correct. The receiver will be set
to UTC time based on the current time of the PC. The PC
time
and the UTC offset
must be correct.
5.
Select to erase the old data and begin the study – only select this option if the data has already been
offloaded to the computer.
6.
Select “Show Advanced Settings” in the Study Configuration
window.
7.
Click on the down-arrow to the right of the old Map name (MAP-113 in this case) and select the new map
(MAP-114).
8.
Click the “OK” button to begin the study.
9.
Verify that the Status light on the VR4-UWM is flashing two quick flashes every
five seconds.
It is vital that the PC clock be
correctly set to your local time,
including time zone,
before
the VR4-UWM is initialized
.
Retrieve all detection logs
before
the VR4-UWM is initialized;
receiver’s memory will be erased.