Vemco VR2C, User Manual

Page: 45 / 66

VEMCO - VR2C Manual 9
Jul 2018
40
*450088.0#25[0009],OK,#9A\r\n
←
command acknowledge
450088,001,2013-09-06 19:36:42,STS,DC=24,PC=204,LV=12.0,BV=3.6,BU=8.5,
I=2.4,T=23.8,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.59,#B0\r\n
450088,002,2013-09-06 19:36:38,A69-1601,12,#44\r\n
>
\r
←
enable serial transc short delay (>100ms)
*450088.0#25,RTMNOW\r
←
command
*450088.0#25[0009],OK,#9A\r\n
←
command acknowledge
450088,003,2013-09-06 19:36:59,STS,DC=27,PC=225,LV=12.0,BV=3.6,BU=8.5,
I=2.3,T=23.8,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.59,#BF\r\n
450088,004,2013-09-06 19:36:44,A69-1601,13,#44\r\n
450088,005,2013-09-06 19:36:50,A69-1601,12,#41\r\n
450088,006,2013-09-06 19:36:56,A69-1601,13,#49\r\n
>
3.2.5.3.5 RTMINFO
The RTMINFO command is used to retrieve information regarding the VR2C’s RTM. This information
includes whether RTM is enabled (and on what communication lines) as well as other RTM configuration
settings related to RTM data output timing and format.
Command:
*450088.0#25,RTMINFO\r
Response: *450088.0#25[0053],232,SI=60,BL=U,BI=1,MA=U,FMT=SER SEQ UTC CS,OK,#8A\r\n
232 =
Real Time Mode
Possible values include 232, 485 and OFF
SI =
Status Interval (in seconds)
RTM PROFILE 2 returns POLL in this field (SI=POLL) as there is no actual fixed interval
in profile 2)
BL =
Block Length in number of lines (U = unlimited number of lines)
BI =
Block Interval in seconds (WFS = wait for status)
MA =
Max Age filter in seconds (U = unfiltered)
FMT =
RTM Output Data Format Options (Determines format of RTM output data)
Possible values include:
SER =
Serial Number
SEQ = VR2C Sequence Number
UTC =
ASCII Universal Time
LCL =
ASCII Local Time
DEC_UTC =
Decimal Universal Time
DEC_LCL =
Decimal Local Time
CS =
Checksum
Note: Block length, block interval, max age filter and output format options are pre-determined for each
RTM Profile. The settings for each of these profiles are shown below:
RTMPROFILE=0:
*450088.0#25
[0053],232,SI=60,BL=U,BI=1,MA=U,FMT=SER SEQ UTC CS,OK,#8A\r
RTMPROFILE=1: *450088.0#25
[0055],232,SI=60,BL=U,BI=WFS,MA=U,FMT=SER SEQ UTC CS,OK,#49\r
RTMPROFILE=2:
*450088.0#25
[0057],232,SI=POLL,BL=U,BI=WFS,MA=U,FMT=SER SEQ UTC CS,OK,#1A\r