VEMCO - VR2C Manual
9
Jul 2018
39
<
450088,001,2013-09-06 19:15:14,STS,DC=12,PC=103,LV=12.0,BV=3.6,BU=8.5,
I=2.4,T=23.8,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.63,#A2\r\n
450088,002,2013-09-06 19:14:16,A69-1601,13,#3D\r\n
450088,003,2013-09-06 19:14:22,A69-1601,12,#3A\r\n
450088,004,2013-09-06 19:14:28,A69-1601,13,#42\r\n
450088,005,2013-09-06 19:14:34,A69-1601,12,#3F\r\n
450088,006,2013-09-06 19:15:09,A69-1601,191,#7B\r\n
450088,007,2013-09-06 19:15:15,A69-1601,179,#7F\r\n
>
<
450088,008,2013-09-06 19:16:14,STS,DC=22,PC=178,LV=12.0,BV=3.6,BU=8.5,
I=2.3,T=23.8,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.63,#B6\r\n
450088,009,2013-09-06 19:15:21,A69-1601,191,#78\r\n
450088,010,2013-09-06 19:15:27,A69-1601,179,#7C\r\n
450088,011,2013-09-06 19:15:34,A69-1601,191,#75\r\n
450088,012,2013-09-06 19:15:40,A69-1601,179,#79\r\n
450088,013,2013-09-06 19:15:46,A69-1601,191,#7A\r\n
450088,014,2013-09-06 19:15:52,A69-1601,179,#7E\r\n
450088,015,2013-09-06 19:15:58,A69-1601,191,#7F\r\n
450088,016,2013-09-06 19:16:04,A69-1601,179,#7E\r\n
450088,017,2013-09-06 19:16:10,A69-1601,191,#76\r\n
>
<
450088,018,2013-09-06 19:17:14,STS,DC=22,PC=178,LV=12.0,BV=3.6,BU=8.5,
I=2.3,T=23.8,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.63,#B8\r\n
>
RTM Profile 2 (Polled Block Output)
This profile outputs tag detection records only when explicitly triggered by enabling the VR2C
serial transceiver (refer to Section 3.2.3) and sending the RTMNOW, RTM232 or RTM485
command. The VR2C will output the status line followed by all the tag detection records
received since last triggered.
Command:
*450088.0#25,RTMPROFILE=2\r
Response:
*450088.0#25[0009],OK,#9A\r\n
In this profile, the VR2C transmits a “>” character to terminate the output block.
An example of a RTM Profile 2 session is shown below:
*450088.0#25,RTMPROFILE=2\r
*450088.0#25[0009],OK,#9A\r\n
Sometime later (whenever host wants to interrogate receiver)…
\r
←
enable serial transc short delay (>100ms)
*450088.0#25,RTMNOW\r
←
command
*450088.0#25[0009],OK,#9A\r\n
←
command acknowledge
450088,000,2013-09-06 19:36:21,STS,DC=23,PC=190,LV=12.0,BV=3.6,BU=8.5,
I=2.4,T=23.7,DU=0.0,RU=0.0,XYZ=-0.03:-0.78:-0.63,#A9\r\n
>
\r
←
enable serial transc short delay (>100ms)
*450088.0#25,RTMNOW\r
←
command
