VEMCO - VR2C Manual
9
Jul 2018
14
3.1.2
Establish Communication
Perform the following steps to establish communication with a VR2C from within VUE.
Wait while the VUE
software is installed.
Click “Next” when it
becomes enabled.
STEP 5
Click “Finished” to exit
the setup wizard.
STEP 6
Select “VR2C > Open” from the
list that appears.
STEP 3
Launch VUE
software.
STEP 1
Identify which Serial COM port the
VR2C is connected to on your PC.
STEP 2
Select this Serial COM
port
within the ‘Home’
tab. The last COM port
that was used within
VUE will be identified
with “(Last Used)” under
the name.
Identify the VR2C serial number as specified on the VR2C product label attached around the outside
of the VR2C case. Enter this serial number in the box and click OK. The VR2C serial number may
already be in the drop-down list if VUE has previously been used on this PC to connect to the VR2C.
Click the down arrow to show the list of candidate VR2C serial numbers (see photo on right).
STEP 4
If you are
uncertain of the serial number, then click the “Scan”
icon, and select the desired receiver when the connect option
is offered. If the desired receiver is not the one offered, click
the “Skip” option and continue to scan.
Continued…
