VTSSC50N
V. 06 – 19/02/2016
3
©Velleman nv
Always tin the tip before returning it to the holder, prior to deactivating the station or in case of long
periods of inactivity. Clean the tip with a wet sponge prior to use.
Do not use temperatures over 400 °C (750 °F) as this will shorten the life span of your tip.
Do not exert too much pressure on the tip while soldering to avoid damage.
Never clean the tip with a file or other abrasive materials.
7.
First Use
Attach the holder to the base as shown in the picture (screw included).
8.
Technical Specifications
max. heater power for soldering iron 48 W
temperature range
150 - 420 °C
low-voltage iron
24 V
weight
1.85 kg
dimensions
160 x 120 x 95 mm (without stand and iron)
replacement bits
BITC50N1, BITC50N3, BITC50N4
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
