Velatia ORMAZABAL gae.630 Manual Download Page 9

Page: 9 / 64

IG-322-EN version 03; 22/07/2022

General instructions

-insulated circuit-breaker panel:

Type

gae

.630 -1LSV(G)-/5/

in modular extensible design up to 24 kV, 20 kA

Safety regulations

2. Safety regulations

2.1. Intended use

The

gae

.630 circuit-breaker panel is a prefabricated, type

approved, metal- enclosed, interior switching panel for use

in accessible switchgear rooms and an operating voltage of

up to 24 kV.

It can be extended using series

gae

panel / block modules.

Circuit-breaker panels are used in:

•  transformer stations
•  node stations
•  combined heating and power plants
•  industrial plants
•  customer consumer installations
•  wind energy converters.

The circuit-breaker panel

gae

.630 -1LSV is used to switch:

•  overhead lines and cables
•  transformers
•  motors
•  generators
•  choke coils.

The

gae

.630 circuit-breaker panel is used as a bus

sectionaliser panel

gae

.630 -1LSVG.

The circuit-breaker panel must only be operated, serviced

and repaired by authorised personnel, who have been

instructed or trained accordingly.

These operating instructions must be read carefully and

strictly observed before installing and commissioning the

circuit-breaker panel.

Every person involved in the installation, commissioning,

operation, maintenance and repair of the unit must

have read and understood these operating instructions,

especially the chapter on safety and any other safety

instructions.

We recommend that the user/owner obtains written

confirmation of compliance with this requirement.

Only the exact knowledge of these operating instructions

helps to avoid operating errors and ensures trouble- free

operation.

The general safety and accident prevention instruction

issued by the legislator and possible regulations of the

insurer, which may be different from country to country,

must be strictly observed when operating and servicing the

circuit-breaker panel.

These operating instructions are part of the circuit-

breaker panel. When passing on the circuit-breaker panel

(relocation, selling or similar) the operating instructions

must also be handed over.

Summary of Contents for ORMAZABAL gae.630

































































Search results

Summary of Contents for ORMAZABAL gae.630

Reviews:

Related manuals for ORMAZABAL gae.630

Brands by name

Popular brands

Velatia ORMAZABAL gae.630, Manual

Search results

Summary of Contents for ORMAZABAL gae.630

Reviews:

Related manuals for ORMAZABAL gae.630

Brands by name

Popular brands