Velatia ORMAZABAL gae.630 Manual Download Page 32

Page: 32 / 64

IG-322-EN version 03; 22/07/2022

Technical description

General instructions

-insulated circuit-breaker panel:

Type

gae

.630 -1LSV(G)-/5/

in modular extensible design up to 24 kV, 20 kA

4.8. Three-position switch drive

The spring drive switches the disconnector and the earthing

switch.

The drive is borne on a U-shaped drive carrier. The robust

spring drive is equipped with both disconnector and

earthing actuating shafts.

Both actuating shafts are hollow shafts with integrated

blade inhibitor. These inhibitors prevent the blades from

swinging through to the opposing contact of the three-

position switch when switching the disconnector or

earthing switch OFF. They are unlocked when the switching

lever is inserted into the actuating shafts.

Function and layout of the actuating shafts can be seen in

the mimic diagram.

The rotary movement of the actuating shafts is transferred

to the switching shaft via toggle links and the operating

lever.

The switch position indicator is controlled by the operating

lever.

All parts of the drive susceptible to corrosion are galvanised.

4.9. Switch panel interlocks

The circuit-breaker panel

gae

.630 -1LSV are provided with

the following interlocks as standard fittings.

• Earthing switch to front cover (front cover interlock)
• Circuit-breaker to disconnector or earthing switch

respectively

• Disconnector to earthing switch

32572029

Figure 4.7.

Interlock operating lever

Actuating shaft Disconnector

Anti-reverse interlock

Activation via fastener

Switch position indicator plate

Actuating shaft for earthing switch

Figure 4.8.

Summary of Contents for ORMAZABAL gae.630

































































Search results

Summary of Contents for ORMAZABAL gae.630

Reviews:

Related manuals for ORMAZABAL gae.630

Brands by name

Popular brands

Velatia ORMAZABAL gae.630, Manual

Search results

Summary of Contents for ORMAZABAL gae.630

Reviews:

Related manuals for ORMAZABAL gae.630

Brands by name

Popular brands