Veit SG67 Operating Instructions Manual Download

Page: 17 / 87

Germany:

Europe:

America:

Asia:

E-Mail:

+49 8191 479 133

+49 8191 479 252

+1 770 8688060

+852 2111 9795

[email protected]

Germany:

America:

Asia:

+49 8191 479 100

+1 770 8688060

+852 28349986

3.3 Regulations

The built-in steam boiler of category I is produced according to

TRD 801. According to article 1 (2) – f) of the pressure equipment

directive 2014/68/EU this steam generator is not covered by the

PED 2014/68/EU!

In the Federal Republic of Germany, these steam generators can

be installed and operated without permission.

CAUTION!

In the Federal Republic of Germany, maintenance

must be carried out by a “competent, authorised

and instructed person”. (BetrSichV § 10 (Industrial

Safety Regulation)).

Enclosed with the device you will find the certifi-

cate for the water pressure test and for the proper

installation of the steam boiler unit.

The electrical equipment of the steam boiler com-

plies with the relevant VDE-regulations. The local

connection must be performed according to the

regulations for technical connections of the author-

ised electric supply company.

Service hotline

Spare parts

Safety

Regulations

30.09.2022

Steam generator VEIT SG67

Summary of Contents for SG67
























































































Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands

Veit SG67, Operating Instructions Manual

Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands