Veit SG67 Operating Instructions Manual Download

Page: 12 / 87

Safety

3.1 Safety instructions

In these operating instructions, warnings and notes are indicated

by a symbol and a signal word.

The warning notes are structured hierarchically:

WARNING!

WARNING indicates a potentially hazardous situa-

tion which could result in death or serious injury.

CAUTION!

CAUTION indicates a potentially hazardous situa-

tion which could result in minor or moderate injury.

NOTICE!

NOTE indicates a potentially harmful situation

which could result in damage to the machine and

the surrounding area.

3.2 Warning symbols and danger signs

On the device and in these operating instructions, the following

designations or symbols are used for particularly important infor-

mation:

WARNING!
Replacement of mains connection cable

Electric shocks may lead to death or serious inju-

ries.

–

The mains connection cable must only be

replaced by a member of the VEIT service

team or a person commissioned and instructed

by VEIT!

Safety

Warning symbols and danger signs

30.09.2022

Steam generator VEIT SG67

Summary of Contents for SG67
























































































Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands

Veit SG67, Operating Instructions Manual

Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands