Veit SG67 Operating Instructions Manual Download

Page: 22 / 87

Visual inspection for damage

Function check: The main contactor pulls in when the green

rocker switch is set to the “ON” position, and drops out when

the green rocker switch is set to the “OFF” position.

CAUTION!
Electrically skilled person

This check must only be carried out by an electri-

cally skilled person.

3.4.2 Warning label

Fig. 7: Warning label for blow-down

Fill the blow-down tank with cold water (<15°C) until reaching

the mark!

Screw the screw cap tightly onto the tank!

Slowly and completely open the blow-down ball valve!

The warning label is located on the the back of the machine.

Incorrect blow-down poses a risk of scalding / risk of burns.

Read

Chapter 8.2 ‘Blow-down’ on page 42

in the operating

instructions.

Main contactor (Pos. 4)

Warning label for blow-down

Safety

Built-in safety devices > Warning label

30.09.2022

Steam generator VEIT SG67

Summary of Contents for SG67
























































































Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands

Veit SG67, Operating Instructions Manual

Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands