Veit SG67 Operating Instructions Manual Download

Page: 13 / 87

WARNING!
Faults in electrical system

Electric shocks may lead to death or serious inju-

ries.

–

Faults in the electrical system must only be

resolved by an electrically skilled person!

WARNING!
Risk of burns

Symbol indicating

risk of burns

caused by hot

steam and hot surfaces.

–

In general, there is a risk of burns on the steam

generator caused by hot steam and hot sur-

faces.

–

Do not touch the steam valves on the upper

side of the device.

WARNING!

–

Do not direct the steam jet at persons. Risk of

burns!

–

Do not direct the steam jet at the device. Risk

of damage to the electrics!

WARNING!

In case steam escapes from the device there is

risk of burns!

–

immediately stop the device

–

make sure the leak is removed properly

–

Please observe the notes on maintenance in

Chapter 8.1 ‘Maintenance and inspection

table’ on page 40

of these instructions.

WARNING!

–

Do NOT start up the steam generator when

casings/covers are missing!

Safety

Warning symbols and danger signs

30.09.2022

Steam generator VEIT SG67

Summary of Contents for SG67
























































































Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands

Veit SG67, Operating Instructions Manual

Search results

Summary of Contents for SG67

Reviews:

Related manuals for SG67

Brands by name

Popular brands