37
38
Configuration
To change the language for the OSD and email alarms:
1.
Click
Device Configuration>Language
.
2.
Under
Language
, select the desired language then click
OK
to save
changes.
8.8 Alarm Configuration
Alarm Configuration contains the following sub-menus:
• Disk Alarm
• Motion Alarm
• Alarm I/O (Not supported)
• I/O Alarm Linkage (Not supported)
• Alarm Setting (Not supported)
8.8.1 Disk Alarm
The Disk Alarm page allows you to configure alarms if there is an issue with
the recording disk. You can configure a Disk Full Alarm or a Disk Error
Alarm. A Disk Full Alarm triggers an alarm when the recording disk is full or
exceeds a certain percentage. A Disk Error Alarm triggers an alarm if there
is an error accessing or writing to the recording disk.
Alarms
can
be
viewed
using
the Alarm
Manager
in
Veilux VMS
(see
the
Veilux VMS
manual
on
the CD
for
details).
To configure Disk Alarms:
1.
Click
Alarm Configuration>Disk Alarm
.
2.
Check
Disk Full Alarm
to enable Disk Full Alarms.
3.
Under
Max Disk Space
, enter the disk full percentage that will trigger an
alarm (e.g. a Disk Full Alarm will be triggered when the recording disk is
80% full).
4.
Check
Disk Error Alarm
to enable Disk Error Alarms.
5.
Click
OK
.
8.8.2
Motion
Alarm
The
Motion
alarm
page
allows
you
to
configure
camera
motion
detection
alarm
settings. You
must
enable
motion
detection
to
use
local
(e.g.
microSD/
SD card
or
FTP
recording)
motion
detection
recording.
For
instructions
on
setting
up
local
recording,
see
“8.9
Local
Record”
on
page
40.
For
details on
motion
recording
using
Veilux VMS
,
see
the
Veilux VMS
manual
on
CD.
To configure motion detection:
1.
Click
Alarm Configuration>Motion Alarm
.
2.
Check
Enable
under
Motion Parameter
.
