1
2
1. GETTING STARTED
The system comes with the following
components:
• 1 x Camera
• 6 x Camera locking screws (3x inside
camera; 3x spare)
• 1 x Surface mounting template
• 1 x Junction box plate and screw kit
• 1 x Mounting screw kit
• 1 x Allen key
• 1 x Conduit key
• 1 x RJ45 coupler
Mounting Screw Kit:
• 3 x 2.8in / 70mm screws
• 3 x 1.2in / 30mm screws
• 3 x 1.6in / 40mm anchors
• 1 x BNC test cable
• 1 x Instruction Manual
• 1 x Quick Start Guide
• 1 x Software/Documentation CD
1.1 Default Camera Username,
Password, and Ports
Username:
admin
Password:
admin
Junction
Box Plate
Allen Key
BNC Test Cable
Conduit Key
RJ45 Coupler
Ports:
80
(HTTP),
30001
(Control/Streaming),
8080
(RTMP),
554
(RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once you have completed the basic setup of the camera, it is
recommendedtoconfigure astatic IP address. This will prevent the camera
IP address changing in the event of a power failure. For details, see “8.7.1
Local Network” on page 30.
1.2 Camera Interior Overview
Front of Camera
IR LED’s
Camera Lens
Zoom
Focus
CdS Sensor
Rear of Camera
BNCanalog
output
Reset button
Termination cables
microSD card slot
(max. 64GB supported;
SanDisk™/Kingston™ brand
memory cards recommended)
