11
4 Mounting
VEGAPULS Air 23 • Autarkic device with measured value transmission via radio technology
64314-EN-230606
4 Mounting
4.1 General instructions
The instrument is suitable for standard and extended ambient condi-
tions acc. to DIN/EN/BS EN/IEC/ANSI/ISA/UL/CSA 61010-1. It can be
used indoors as well as outdoors.
Note:
For safety reasons, the instrument must only be operated within the
permissible process conditions. You can find detailed information on
the process conditions in chapter "
Technical data
" of the operating
instructions or on the type label.
Hence make sure before mounting that all parts of the instrument ex-
posed to the process are suitable for the existing process conditions.
An activated device (see chapter "
Activate device
") also carries
out measurements in horizontal alignment. This also applies if it is
mounted on a mobile container and the container is transported in a
tilted state.
Note:
When mounting the device on a mobile container, ensure that it is
protected against damage throughout transport.
4.2 Mounting instructions
The containers can be commercially available combination IBC con-
tainers with a nominal volume of e.g. 1000 l. These typically consist of
an inner container made of HDPE, a metal outer cage and a pallet.
Fig. 4: IBC container - Example
Ambient conditions
Process conditions
Measurement function
and transport
Container requirements