56
6 Set up with the display and adjustment module
FIBERTRAC 31 • Profibus PA
43833-EN-170126
Keep the entered PIN number in mind. Operation of the sensor is only
possible with this PIN number.
Caution:
When the PIN is active, adjustment via PACTware/DTM as well as
other systems is also blocked.
In delivery status, the PIN is
0000.
Call our service department if you have modified and forgotten the
PIN.
Display
In the main menu point "
Display
", the individual submenu points
should be selected one after the other and provided with the correct
parameters to ensure the optimum adjustment of the display. The
procedure is described in the following.
This menu item enables the setting of the requested national lan
-
guage.
In delivery status, the sensor is set to the ordered national language.
If no language is preset, you will be asked during setup.
With this parameter you can change the indication of the display.
You can choose for example if the display should show the actual
pulse rate or the electronics temperature.
Diagnostics
In this menu item, you can enquire the status of your sensor. In normal
operation, the sensor displays the message "
OK
". In case of fault, you
will find the corresponding fault code here.
The peak value function holds the max. and min. values during opera
-
tion.
•
Pulse rates - min./max.
•
Temperature - min./max./actually
Display - Menu language
Display - Indicated value
Diagnostics - Device
status
Diagnosis - Peak value