Vega MT X CAN / User Manual
18
Revision 13 of 27.09.2021
AUTHORIZED DALLAS KEYS
Vega MT X CAN monitoring device allows you to connect an I-Button authorized key reader to a 1-
Wire pin. The connection scheme is shown in the figure below. The number of authorized keys can reach
ten. To add a key, you need to connect to the device through the "Configurator" program and go to the
“Settings” menu -> "Security" tab.
In the "Security" tab, expand the "Authorized Dallas keys" settings item and click the "Add Dallas keys"
button. A dialog box will appear.
Attach the key to the reader as during authorization - the device will remember the key number - and
click "OK". The key number appears in the free field. If several keys are added at the same time, it is allowed
to attach them to the reader in turn, while the add window is open, and only then click “OK” - the numbers
of all keys will be added to the free fields in the order in which they were applied to the reader.
Click the “Save” button to put information about keys into device memory.