Vega MT X CAN / User Manual
12
Revision 13 of 27.09.2021
SIM INSTALLING
To use the Vega MT X CAN monitoring device, you need a micro-SIM
functions. There must be cash on the account. PIN protection must be disabled.
The device supports the ability to use two SIM cards. In this case, one of them will perform the
reserve function, and will be used only if it is not possible to send data from the first main SIM.
The devices have their own algorithm for SIM-card switching from main to reserve and back:
1)
The device cannot join to the network for the 5 minutes while it operates with main or reserve
SIM-card;
2)
If 16 unsuccessful attempts were made to establish a TCP connection to each server (not
disabled in the settings);
3)
If a TCP connection is established, but there is no data at the application level from the servers for
the 5 minutes.
To install the SIM, you must remove the top cover of the device and de-energize the board by
carefully disconnecting the battery. Then insert the SIM into the holder, connect the battery and assemble
the device.
To avoid damage and malfunction, it is recommended to perform all manipulations
with the board when it is de-energized
The location of the primary and secondary SIM slots is shown in the figure below, the primary slot is
highlighted in red.
3
In the MT X LTE v2 model, the SIM holder format is nanoSIM, in the rest of the models, microSIM is used