Vega MT-5 CAN/ User Manual
13
Revision № 04 of 01 July 2022
Step by step mounting is as follows:
1.
De-energizing the connected equipment and the vehicle's on PCB power.
2.
Connection of Ignition wire
to tracker (input 6).
3.
Connection of external power wires according to the scheme through a fuse.
4.
Power ON.
5.
Connection of an external equipment, sensors, and configuration of them (see part
"External
equipment connection"
).
6.
Device configuration, CAN bus operation if it is needed.
7.
By the laptop you can make sure that the device is successfully configurated and sends the
correct data.
8.
Mounting of the device with zip ties.
General recommendations for the placement of antennas boil down to two rules: avoid covering the
GSM antenna with metal parts of the vehicle and, if possible, provide a line of sight to satellites (i.e.,
open skies).
4
Connecting the Ignition wire is a necessary step for the functions of monitoring and charging battery
