Vega MT-5 CAN / User Manual
24
Revision № 04 of 01 July 2022
t:unixtime – set lifetime
for the command
@PIN:XXXX/t:unixtime
ХXXX – command for which is needed to set a
lifetime
unixtime – time in UTC when the command
will not execute even the SMS with it just
comes. For example, we send the command
for device rebooting at the 14.00 and set
lifetime for that command until 14.10. So if the
device receives the command from 14.00 to
14.10 the command will execute as usual, but if
the SMS will delayed, will not be delivered
immediately etc., and the device receives the
command at the 14.15 the command will not
execute because lifetime is up.
After the time has passed, the message
"Execution time has expired" will come
@4444: reboot/t:
1577196600
____________
PIN – 4444
Command – device reboot
Lifetime of the command is
until 14:10:00 24.12.2019
changesim – change
current SIM
@PIN:changesim
@4444:changesim
____________
PIN – 4444
changesim1 – change
SIM to the first
@PIN:changesim1
@4444:changesim1
____________
PIN – 4444
changesim2– change
SIM to the second
@PIN:changesim2
Answer examples:
changesim:2 ok
– command successfully
done;
changesim:2 err, already in use
– SIM2 already
used.
@4444:changesim2
____________
PIN – 4444
When requesting the current state of the block, a message arrives with the following contents:
Vega МТ-5 CAN v3.10 0.4b – device name and firmware version
imei: 355217043382910 – device IMEI number
lat: 55.1173, lon: 37,9475, - device coordinates (latitude and longitude)
sat inview: 22, - number of visible satellites
sat inuse: 14, - number of satellites used
valid: 1 – validity of certain coordinates (0 – no, 1 – yes)
