![background image](http://html1.mh-extra.com/html/vega-absolute/mt-5-can/mt-5-can_user-manual_3810850018.webp)
Vega MT-5 CAN / User Manual
18
Revision № 04 of 01 July 2022
To increase the load on the outputs of the device, you must use an external relay. The relay connection
diagram is shown below.
By default, after a device reboot, the state of the digital output is reset to 0, that is, "off". In the settings,
it is possible to save the state of the device output and digital outputs of the connected
To do this, you need to connect to the device through the “Configurator” program, go to the “Settings”
menu -> “Inputs/Outputs” tab and select the “Restoring output states after reboot”. Opposite the desired
output, select "restore" in the drop-down menu. Then, after a reboot, this digital output will be restored to the
state that was written to the non-volatile memory of the device before the reboot.
Writing of statuses into non-volatile memory carried out at every 30 seconds