Note:
The Pass-Through setup screen will vary based on the data path setting in the DSL link setup mode. ATM
mode applies mostly to ADSL type connections while PTM mode applies mostly to VDSL2 network
architecture.
Status
: Displays the following results depending on IP method selected;
Static IP mode:
IP address:
Address of the network device or PC connected to the LAN port
Gateway:
IP address of default gateway
DNS IP:
Address of the Domain Name Server to be used by the tester
Result:
Connection Passed or Failed.
Dynamic IP mode:
IP address:
Address of the network device or PC connected to the LAN port
Gateway:
Address of Gateway
Subnet Mask:
Address of sub-net
DNS IP:
Domain Name Server address
Authentication:
PAP or CHAP (PPPoE or PPPoA only)
Result:
Router connection status: Passed or Failed.
PPP session status: Passed or Failed
Pass Through Status - Router (Static)
Pass Through Status - Router (Dynamic)
BX100A/V e-Manual D07-00-001 Rev E01
Page 37 of 52