Note:
In the Settings menu on the Main menu, you are able to configure the test set to hide your
User name
and
Password
if needed.
Router mode (ATM data path mode):
LAN settings:
Allows you to configure the LAN parameters when connected to the tester's Ethernet interface. Available only
when the WAN interface is set to Router.
IP method:
Static or DHCP
DHCP enables the dynamic host configuration protocol (DHCP) mode
IP address:
Enter a value using the pop-up keypad
Subnet:
Network address to identify if the IP address falls within the local area network.
Scope start:
DHCP mode only. Starting range for IP address allocation. Enter a value using the pop-up keypad
Scope end:
DHCP mode only. Stopping range for IP address allocation. Enter a value using the pop-up keypad
Lease time:
DHCP mode only. Enter a "Hour" value using the pop-up keypad
Pass Through Setup - Router (LAN)
Pass Through Setup - Router (LAN)
BX100A/V e-Manual D07-00-001 Rev E01
Page 36 of 52
