Veet Infini'Silk, User Manual

Page: 48 / 68

english
48
You can use two methods of Veet
®
Infini’Silk
TM
: "light flashes" or "gliding".
Light flashes
When using flashes, emit a flash of energy intensity each time at the desired
intensity. Be guided by the pressure signs that the device temporarily leaves in
order to correctly place the panel for the next flash, in a way that avoids gaps
and overlapping between the flashes.
Skin section coverage
The treatment must be performed using Veet
®
Infini’Silk
TM
in rows, starting
from one end of the line progressing in sequence to the other end. This
method allows better control of skin coverage that helps prevent treatment
in the same section more than once or overlapping skin sections.
Parts of the body that can be treatment with the Veet
®
Infini’Silk
TM
are underarms, bikini line, arms and
legs. Do not use Veet ® Infini’Silk TM in any other area of the body!
7. Repeat from step 5, until the completion of treatment.
Gliding
Another treatment method is using gliding. Hold the light flashes constantly and glide the device
smoothly over the treated area.
Please note that this strategy works best when you use the device with at the weakest intensity. Thus
the device's loading times between flashes are about a second to a second and a half.
With both methods of treatment be careful not to treat the same section of the skin more than once
every hair reduction treatment! Treating the same section of the skin more than once each treatment
increases the risk of side effects.
Perform the gliding movement while holding flash button constantly and moving the device gently and
smoothly over the treated area. The treatment becomes faster and more efficient. Despite that the
gliding uses weaker pulses, in order for charging to be quicker, it is still important to use a skin covering
and prevent treatment twice to that same section. When using Veet® Infini'SilkTM, treatment surface
creates a gentle signs on the skin in the treated area. You can use these signs to correctly guide the
device during treatment.
If your skin blisters or burns discontinue treatment immediately and seek medical advice!