Veet Infini'Silk, User Manual

Page: 50 / 68

english
50
10. How to use Veet
®
Infini’Silk
TM
10.1 Preparing Veet
®
Infini’Silk
TM
1. Remove the Veet
®
Infini’Silk
TM
and the accessories from the packaging.
2. Connect the electrical cord to the socket of the Veet
®
Infini’Silk
TM
device
3. Connect the plug of the electrical cord to the electric socket
4. All six indicator lights (the sliders) will blink on and off, one after another in a circle. Veet ® Infini’Silk TM is
now ready for use.
10.2 First treatment using Veet
®
Infini’Silk
TM
1. The treatment areas should be shaved, clean, dry and free of any kinds of products such as talc (or any
other powder), deodorant or any other products against perspiration. Do not pluck the hair with wax,
by pulling it out or with tweezers before using the Veet
®
Infini’Silk
TM
Pro device. Shaving is an important
stage in receiving the desired results!
2. Press a short press the middle button. Energy intensity indicator 1 lights up in green. About a second
later, the sign that the device is ready lights up. Now the device is set to pulses of the weakest intensity.
The device is ready to operate the first flash.
3. If you want to change the energy intensity (see explanation below), press the middle button briefly and
repeat the action to increase between intensity levels 1 to 5 until you reach the desired intensity. From
intensity 5 device returns back to intensity 1. The green energy intensity indicators indicate the energy
intensity set (for more information, see the framework below, "energy intensity").
Energy Intensity
The energy intensity is set by the flashes of light that the Veet
®
Infini’Silk
TM
emits on the skin. The range
varies from the lowest intensity (1) to the highest intensity (5). The sliders on the control panel shows
the energy intensity to which the device is set. The stronger the energy intensity, such the results of hair
reduction are better but so does the risk of side effects increase . Conversely, the weaker the energy
level is, the hair reduction results will be weaker but at the same time the risk of side effects and
complications are reduced.
When you start using Veet Infini’Silk™, always begin with the weakest intensity level.
Only after using Veet
®
Infini’Silk
TM
at the weakest intensity, if you felt slight discomfort or you didn't feel
any discomfort at all,
the next time in the same area
that you use Veet ® Infini’Silk TM you can increase
the intensity by one level – one additional slider. If you felt slight discomfort or you didn't feel any
discomfort at all – it is possible to increase the intensity level gradually between each treatment.