51
1
2
3
1
2
3
1
2
3
1
2
3
-
+
-
+
ADJUSTMENT PUSH RELEASE FORCE
ADJUSTING PUSH FRONT GAP
Adjust the push’s release force by
changing the direction of the lever on
each push unit.
On the outer edges of the push
units, there are adjusting screws
that increase or decrease the size
of the front gap. Adjust the size of
the front gap using the adjusting
screws on either side.
6. Installation of details
Art. no. 30729 Push set with two cassettes and openers (catchers), suitable for both the fully extending Classic and Scala drawers. Will be supplemented
with two screws art. no. 39141, Spax-S TKX 3.5x15 screws for attaching the cassettes to the drawer. Supplemented with synchronisation bar art. no. 30789 for
cabinet width 300 mm, art. no 30790 for cabinet width 400 mm, art. no. 30791 for cabinet width 500 mm, art. no. 30730 for cabinet width 600 mm, art. no.
30731 for cabinet width 700 mm, art. no. 30732 for cabinet width 800 mm, art. no. 30734 for cabinet width 1000 mm. For cabinet width 1000 mm, it is also
supplemented with holder for synchronisation bar with art. no. 30620 and a screw art. no. 39141 Spax-S TKX 3.5x15 for attaching the holder art. no. 30620 in
the cabinet bottom. If push is combined with a handle strip on the front, the push units will always be delivered loose alongside and be installed on site.
Important:
When adjusting the release force,
first open the drawer by pushing it out using
the push function (the drawer must not be
pulled out without the aid of the push function,
as the lever could easily break).
min. 58
EB
NOVA PRO TIPMATIC SOFT-CLOSE
Montage /Assembly/Montage/Montaggio/Montaje/Monteringsanvisning/
Монтаж
111679 - 01/2017
Einbaumaße /Installation dimensions/Cotes de montage/Misure di montaggio/
Medidas de montaje/Installations mått/
Установочные размеры
Erforderliches Zubehör
Required accessories/Accessoires nécessaires/Accessorio necessario/
Accesorios necesarios/Nödvändiga tillbehö r
/необходимые комплектующие
clic k
Ø
3.5x15
2x
EB
30
EB
30
1
2
3
clic k
www.grass.eu, [email protected]
1
2
4
3
5
6
7
8
9
Synchronisation bar
30789, 30790, 30791,
30730, 30731, 30732,
30734.
1
2
3
1
2
3
For cabinet width 1000 mm, it is
also supplemented with holder for
synchronisation bar with art. no. 30620.
CLICK!
6.13 INSTALLING PUSH ON FULLY EXTENDING CLASSIC AND SCALA DRAWERS