TCI-W11-U, TCI-W22-U Universal Controller
T
ECHNICAL
S
PECIFICATION
Doc: 70-00-0140C, V2.0-20220523
© Vector Controls LLC, USA
Page 4-24
Subject to alteration
Mounting Location
•
Install the controller on an easy accessible interior wall, approx. 1.5 m above the floor in an area of average temperature.
•
Avoid direct sunlight or other heat sources, e.g. the area above radiators and heat emitting equipment.
•
Avoid locations behind doors, outside walls and below or above air discharge grills and diffusers.
•
Location of mounting is less critical if external temperature sensors are used.
•
Ensure adequate air circulation to dissipate heat generated during operation.
•
Observe local regulations.
•
Do not mount in a wet or condensation prone environments.
Installation instructions
See TCI-W installation sheet no. 70-000539 (
Dimensions mm (inch)
