VDO MS 5000 -, User Manual

Page: 134 / 181

Operation
134
Invoke / quit Setup menu
— Press all three buttons at the top of the display at the same time.
The Setup menu appears.
— Briefly press the
MENU -button until the desired setting is activated.
— Carry out the setting desired.
— To quit the Setup menu press the
MENU -button until the menu is hidden.
If a button has not been pressed for several seconds, then the OSD menu is
automatically hidden again.
Automatic brightness control
If the automatic brightness control (“Bright.Contr.”) in the Setup menu is set to
“Auto”, then the brightness of the display is automatically adjusted to the ambient
light conditions.
With the “Brightness” option in the OSD menu you can adjust the maximum and
minimum brightness of the display. Note that for daylight the maximum brightness
(“Brightness Day”) and for darkness the minimum brightness (“Brightness Night”)
should be set.
The brightness is then adjusted between these two limits according to the ambient
lighting.
If the automatic brightness control is switched off, then the display shows “Bright-
ness Auto OFF” in the OSD menu.
DE-IT-E_MO_MS5000.book Page 134 Sunday, November 7, 1999 10:57 PM