VDO MS 5000 -, User Manual

Page: 133 / 181

Operation
133
English
Adjusting settings
— Press the MENU- button until the desired menu item appears.
— Carry out the desired setting with the + or - buttons.
If necessary, invoke the next menu item by pressing the MENU -button and carry out
the settings.
If you use the built-in display loudspeaker leave the volume level in the OSD
menu on the middle setting. Adjust the volume level for the audible messages of the
navigation system only with the + or - buttons on the remote control.
The volume level of the built-in display loudspeaker can also be set without
invoking the OSD menu. To do so:
— Press
+ or - button on the monitor.
The display automatically changes to the menu for setting the volume level.
— Set the volume as required.
Quit OSD menu
To quit the OSD menu press the MENU -button until the menu is hidden.
If a button has not been pressed for several seconds, then the OSD menu is
automatically hidden again.
Settings in Setup menu
In addition, the monitor offers you the possibility of performing the following set-
tings in the Setup menu:
• Bright.Contr.: Auto / Auto off:
Automatic brightness control On / Off. With “Auto” the display brightness is
automatically adapted to the ambient lighting.
• Mount.Pos.: high / low:
Adaptation of the display brightness to the mounting position high / low
• Loudspeaker: On / Off:
Built-in loudspeaker On / Off.
If the loudspeaker is switched off, then it will automatically be switched on again
as soon as you adjust the display volume.
DE-IT-E_MO_MS5000.book Page 133 Sunday, November 7, 1999 10:57 PM