VDO MS 5000 -, User Manual

Page: 132 / 181

Operation
132
Stand-by
If you do not need the map display or visual directional information, then you can
switch them off.
— Select the “Stand-by” option in the Start Menu.
The display is switched off; audible messages (e.g. directional information,
if “Guidance” has previously been activated) continue to be provided via an
external loudspeaker.
In order to turn the display on again (turn off Stand-by), press one of the cursor
buttons 4 , 6 , 8 , 2 or the OK -button on the remote control.
If the system is switched off in stand-by mode it restarts in stand-by mode when
the ignition is switched on again.
Set monitor (MM 5000)
1
The colour display is equipped with OSD prompting for the display settings.
Invoke OSD menu
— Briefly press the MENU -button at the top of the monitor.
The OSD menu “Navigation Settings” is displayed.
(for “Video Settings” see “External video connection” on page 163.)
In the OSD menu you can carry out the following settings:
• Volume:
Volume level of the built-in display loudspeaker
• Brightness: Brightness of the display
• DisplayMode: Screen display; the selected setting is indicated with a
yellow bar. Possible selections include:
“Full Screen” (16:9)
“Normal” (4:3)
1) does not apply in connection with MR 6000
DE-IT-E_MO_MS5000.book Page 132 Sunday, November 7, 1999 10:57 PM