VDO MS 4200 RS Owner'S Manual Download

Page: 59 / 74

Displaying/deleting via points

If via points have been entered for the current
destination, the “

Via points

” option will be active.

The number of via points still to be reached also
appears.

☞

Select the required via point from the list in order
to view details or delete it.

Destination

Display of current destination address with Name
(if entered), country code, city, road, and crossroads.

GPS / Compass

Display of the following information:
1. GPS reception status: Displays the number of GPS

satellites received. With an unobstructed view of
the sky, up to 8 satellites may be displayed.

2. Current driving direction (compass). The arrow

always points north.

3. Date and time

Trip computer

The following information appears in the “Trip
computer” information menu:

–

Current speed

–

Average speed

–

Maximum speed so far

–

Distance travelled

–

Time travelled

■

Resetting values:

☞

Confirm

by pressing

☞

Confirm the deletion with “

Yes

”.

☞

All trip computer values are reset to zero.

■

Speed warning:

You can enter a speed above which an alarm will sound. To set the speed limit, see
“Speed” on page 66.

NAVIGATION

Via points

WETZLAR

DARMSTADT

Return

SIEMENS VDO

WETZLAR

PHILIPSSTRASSE

House number: 1

15.03.2003

8:12

Return

Trip computer

55 km/h

36 km/h

167 km/h

435 km

Summary of Contents for MS 4200 RS











































































Search results

Summary of Contents for MS 4200 RS

Reviews:

Related manuals for MS 4200 RS

Brands by name

Popular brands

VDO MS 4200 RS, Owner'S Manual

Search results

Summary of Contents for MS 4200 RS

Reviews:

Related manuals for MS 4200 RS

Brands by name

Popular brands