■
Info Points function
Visual and audible indication of important points along your route. Different
providers of travel and traffic information have optimised these specifically for
navigation systems. This includes information about fixed speed camera installations
or other safety relevant information (e.g. schools, kindergartens, etc.) and places of
interest to tourists. If you have activated such a product by means of a C-IQ access
code, the Info Points function can be activated and deactivated.
The Info Points function can be activated as follows:
☞
In the “
Settings
” menu , select “
Info Points
”.
☞
Visual display of Info Points can be switched on using the “
Active
” option.
✎
When you approach an Info Point, the navigation system displays a corresponding
message and detailed information on the appropriate point.
☞
With the “
Audible Warning
” option, you can additionally activate an audible
signal announcing an Info Point.
✎
Using the Info Points function in conjunction with the fixed speed camera
information will help you increase your awareness as you drive through areas which
have been classified by the authorities as particularly relevant to safety. Although
every care has been taken, comprehensive coverage cannot be guaranteed.
What else has changed in MO 4254?
■
MUTE
(See page 24)
No traffic announcements or navigation messages are made when muting is activated.
Should you nevertheless wish to hear traffic announcements (with TA Scan activated)
and navigation information without the radio or CD playing, simply turn the volume
to zero on the unit. The announcements and information are then output at the
preset volume (“TA volume” or “NAV volume” in the “INFORMATION” menu).
■
Entering letters / Different input methods
(See page 26)
The database allows you to enter the different parts of compound city or road names
in varying sequence.
✎
The input methods depend on the map CD inserted. Not all map CDs support this
function.
■
TMC Scan (Traffic Message Channel)
(See page 28)
✎
Stations with Pay TMC (subject to a fee) content are not supported and are ignored
during the search.
✎
If an MT 5011 TMC receiver is installed, “TMC Scan” setting in the Info menu has no
influence on navigation.
Only the TMC data received by the TMC receiver is used for dynamic route planning,
provided this is activated in the “
Settings
->
TMC Source
” menu.
NEW OPERATING SOFTWARE MO 4254
8
Summary of Contents for MS 4200 RS
Page 74: ...72...
