■
AF re-tuning (only in FM)
(See page 33)
✎
The radio continuously checks a series of alternate frequencies (AF) for the selected
station and automatically chooses the best frequency.
Deactivate this function only if you hear brief interruptions of transmission or if the
unit automatically switches to an undesired station (e.g. to an other regional station
belonging to the selected station).
■
CD player / CD changer
(See pages 35 and 37)
A
Do not insert DVDs or shaped CDs in the CD player or in the CD changer magazine. If
you ignore these recommendations, you risk damaging your unit.
✎
The system may not be able to play copy-protected audio CDs which do not
correspond to the Compact Disc Audio Standard or play them properly.
■
Clock Settings
(See page 39)
✎
The “
Clock Type
” menu option in the “
Clock Settings
” menu has been
discontinued. The clock is automatically synchronised via the GPS signal. If
necessary, you must set the time change applicable to your particular region (time
zone).
■
Security code (anti-theft protection code)
(See page 40)
✎
You must enter the code in order to open the menu for activating, deactivating or
changing the code. The number of entry attempts is unlimited.
In the factory settings, the code is set to “0000” and deactivated.
✎
Following a voltage supply interruption to the unit (e.g. removal) with an active
code, the unit is blocked following ten incorrect entries of the code. The unit can
only be reactivated by taking it to a Service department along with proof of
ownership. This service is subject to a fee.
■
Entering a new address
(See page 46)
✎
The destination input functions via the postal code and Quick Access are not
supported by all map CDs.
■
“Bypassing a traffic obstruction locally” and “Alternative Route”
(See pages 61 and 62)
✎
In the preview screen for the alternative route, the
L
option is also available.
“
L
” can be used to display a road list for the detour.
■
Dyn. route sett. (settings for dynamic route guidance)
(See page 67)
✎
This setting is only possible when “
Dyn. route
” is activated in the route selection
and a TMC station is received (in Radio or via an optional TMC receiver).
■
Settings / language
(See page 68)
✎
Some of the extended voice information may not be available for all voices. We
therefore recommend only loading the voice designated as “new” in the desired
language from the software CD.
NEW OPERATING SOFTWARE MO 4254
9
Summary of Contents for MS 4200 RS
Page 74: ...72...
