■
Additional route criteria “Avoid ferry” and “Avoid tunnel”
In addition to the previously available route criteria, “No toll road”, ferries and
tunnels can be deliberately avoided during route planning.
✎
Availability of this function depends on the map data used. If route planning is not
possible without the selected exceptions, toll roads, ferries and tunnels are included
in route planning.
■
Support of compressed map data
As of version 2004/02, the map and travel info content is compressed on the map CDs
in order to make further useful C-IQ content available to you.
✎
The new map CDs can then only be read using this operating software version or
higher.
■
Automatic mode for dynamic route planning
Fully automatic dynamic route planning allows you to concentrate on what is
important. The navigation system plans the route, taking into account the current
traffic situation without you noticing.
☞
Activate the “
Automatic
” option in the “
Settings
–>
Dyn. route sett.
” menu.
✎
When Automatic mode is activated, no information is displayed regarding present
traffic problems. The route is always calculated based on the current traffic
situation received via TMC.
✎
Automatic mode is switched off in the factory settings.
■
TMC traffic information independent of radio station
(with optional MT 5011 TMC receiver)
With the optionally available MT 5011 dynamic TMC receiver, you are always informed
of the current traffic situation. The MT 5011 receives the current local TMC traffic
information regardless of the radio station being listing to.
☞
Activate the “
Ext. TMC Receiver
“ in the “
Settings
–>
TMC source
” menu, in
order to use the TMC receiver as the source for traffic announcements.
✎
The new setting is only active after re-starting the system.
✎
The TMC traffic announcements received by the TMC receiver are then used
exclusively for navigation, regardless of the radio and Info menu settings.
✎
Reception of a RDS-TMC station is indicated by the filled TMC symbol in the
“
GPS / Compass
” information screen.
Selecting a TMC station:
☞
In the navigation main menu, select “
Traffic info
”.
☞
Select “
TMC Provider
” in the “
Traffic info
” menu.
☞
Select the
L
symbol.
☞
The list of available TMC stations is displayed.
☞
Select the desired station from the list.
✎
If the selected TMC station can no longer be received, the TMC receiver switches to
“
Automatic
” and searches for the TMC station with the strongest signal.
✎
Select “
Automatic
” for the station with the best reception to be automatically
selected for evaluation of the TMC data.
✎
Every time the ignition is switched off, “
Automatic
” mode is activated
automatically.
NEW OPERATING SOFTWARE MO 4254
5
Summary of Contents for MS 4200 RS
Page 74: ...72...
