29
Touchscreen:
The navigation system is equipped with a touchscreen. You can tap the
on-screen button with your finger.
Avoid touching the screen with sharp or rough-edged objects as these can damage the
sensitive touchscreen display.
The following functions are available in the main selection screen:
Navigation
(page 32): In this mode, you can enter a destination and then navi-
gate to the destination.
Settings
(page 31): Here you can configure the basic settings, e.g. volume, your
preferred journey parameters, unit of measurement (kilometres or miles), your
home address.
Route Planner
(page 36): In this mode, you can plan a route, determine the dis-
tance and enter various destinations/points en route.
Multimedia
(page 37): Select this option if you want to play MP3 files or view
JPG images.
Note:
Extensive information on operating the navigation system and PC Map Tool can
be found in the detailed user's guide on the DVD-ROM provided. Acrobat Reader
®
will
be needed to download these features (Acrobat Reader
®
is included on the DVD-
ROM)
GPS Reception
When you switch on the device for the first time, it can take several minutes for the GPS re-
ception to reach a sufficient level and to determine your current position. If you are unable
to obtain a sufficient GPS signal, please read the “Troubleshooting” chapter for suggestions
on solving the problem.
Configuration
•
Press the on-off switch for about 3 seconds to
switch on the navigation system. The system
boots and the battery starts to charge.
•
When you switch on the device for the first
time, you may have to select the desired lan-
guage for the navigation instructions as well as
the country map.
•
Confirm your settings with
OK
.
•
As soon as the system is ready, the main selec-
tion menu will appear on the screen.
The GPS reception can be checked by
doing the following:
•
Tap the
Settings
buttons. Here you will see a
range of settings including
Data Link
.
•
Tap
OK
.
•
The following information is shown: GPS sig-
nal quality, number of GPS satellites currently
being received, latitude and longitude of cur-
rent position, current altitude.
Configuration
MS2000-2100Traffic.book Seite 29 Mittwoch, 4. Januar 2006 3:02 15
