34
The following functions are available in the navigation screen and the route list:
Point en route
One point en route at a time is shown in the lower area. You will see the route length and
journey duration below the current point on route.
Show the next/previous point en route
You can browse through the route list by tapping the two arrow buttons left and right of
the itinerary description. The next or the previous point on route is shown. At the same time,
the map section focuses on this point on route.
Zoom in/out with the map
Using these two buttons - (–) and (+) - you can adjust the size and scale of the map section.
•
To zoom out of the map, repeatedly tap the (–) button until you have decreased the
magnification to the desired level.
•
To zoom in to the map, repeatedly tap the (+) button until you have increased the mag-
nification to the desired level.
Using the arrow button (bottom right of screen), you can open another menu.
This contains additional functions and information for the current operation/
process.
Additional Navigation Functions
•
Tap the arrow symbol in the bottom right of the
navigation screen.
•
The buttons for the extended navigation func-
tions appear.
Example:
End navigation
•
Tap the
End Navigation
button.
•
You return to the main selection screen.
Example:
Route&Sound
Tap the
Route&Sound
button to open the MP3 player. You can now use the functions of
the MP3 player and listen to your desired title. The song will being played will be interrupt-
ed by the voice alerts for navigation.
Example:
Recalculate route
If you tap the Recalculate route button during the journey, the route to the specified des-
tination will be recalculated - starting from your current position. This recalculation is use-
ful, for example, when you select a road during the journey which is different to the one
suggested by the navigation system.
Navigation Mode
MS2000-2100Traffic.book Seite 34 Mittwoch, 4. Januar 2006 3:02 15
