En
gl
ish
19
Resetting the Sound Init
This function allows to completely reset the
sound init parameters.
1- Long press SOUND.
2- Select SOUND RESET with the
keys.
3- Press ENTER to launch the resetting.
Setting Loudness for Low Freq.
This source independent function adapts the
loudness response curve for low frequencies.
1- Long press SOUND.
2- Select LOUD LOW with the
keys.
3- Use
keys to select a level value: level 0
to level 3.
4- Press ESC to enter the value.
Setting Loudness for High Freq.
This source independent function adapts the
loudness response curve for high frequencies.
1- Long press SOUND.
2- Select LOUD HIGH with the
keys.
3- Use
keys to select a level value: level 0
to level 3.
4- Press ESC to enter the value.
Defining Bass Freq. Threshold
This source dependant function defines the
bass frequency threshold.
1- Long press SOUND.
2- Select BASS FREQ with the
keys.
3- Use the
keys to choose 80 Hz (default
value) or 40 Hz.
4- Press ESC to enter the value.
Note
:
The setting is memorised to be re-used
for the "Bass/Treble" Preset-Sound effect.
Defining Treble Freq. Threshold
This source dependant function defines the
treble frequency threshold.
1- Long press SOUND.
2- Select TREBLE FREQ the
keys.
3- Use the
keys to choose 5kHz (default
value) or 7 kHz.
4- Press ESC to enter the value.
Note
:
The setting is memorised to be re-used
for the "Bass/Treble" Preset-Sound effect.
Switching the Automatic Leveller
This function allows an automatic levelling
between the different sources (including only
tuner, DAB, CD, CDC, and Tape ; excluding
Auxiliary, Navigation-In and Phone-In).
1- Long press SOUND.
2- Select LEVELLER with the
keys.
3- Use the
keys to set ON (default) or OFF.
4- Press ESC to enter the value.
Note
:
If you disabled this function, you cannot
select any manual offset for volume level
between the different sources.
Defining Subwoofer Threshold
This function sets the low pass filter frequency
for the subwoofer amplifier.
1- Long press SOUND.
2- Select SUBWOOFER with the
keys.
3- Use the
keys to set the value to Freq40,
Freq80 or OFF.
4- Press ESC to enter the value.
Switching Subwoofer Amplifier
This function allows you to activate the inter-
nal subwoofer amplifier of the radio.
1- Short press SOUND.
2- Select SUB AMPLI with the
keys.
3- Use the
keys to set ON or OFF.
4- Press ESC to enter the value.
Note
:
In Phone IN source and during announ-
cements, the subwoofer level is fixed to 0 (not
OFF) and cannot be changed.
Starting the Auto-Equalizer
Use this function to start the auto-equalizer
calibration (see Configuration).
1- Long press SOUND.
2- Select AUTO EQ with the
keys.
3- Press ENTER.
Note
:
When Autoequalization is active, you
can stop it by switching OFF the set.
AN 2001 2L gb.qxd 16/07/01 14:54 Page 19
