13
Selecting the Continent Area
With this function, you can select the con-
tinent area for tuning.
1- Long press ENTER.
2- Select TUNER with the
keys.
3- Use the
keys to select the continent:
USA, EURO, ASIA.
4- Press ESC to enter the value.
You can set the CD options after selecting the
CD source. Then by either a short or long
press on the ENTER key, you get two different
CD menus (see cover pages).
Note
:
The CD Player uses 12 cm CD and can
read MP3 CD (only CD4802): in this case, you
get the MP3 menus.
Warning: Do not load damaged ,
exotic or unusually shaped CD.
Loading CD in the CD Player
1- Press REL to open the front.
2- Move completely down the front.
3- Insert the CD (label upwards) into the slot.
4- Close the front: the display shows CD
Player briefly, then the playback starts.
Warning: If you load a MP3 CD, it
may take one minute to read the
MP3 files before hearing music.
Note 11
:
If the CD is already inserted, use the
SOURCE key to select CD.
Note 22
:
During playback the screen shows
manually entered name of the disk (see TITLE
ENTRY paragraph), current track number and
elapsed time of the current track.
Note 33
:
Some disks contain text data (song
titles, singer's name, etc.) which are displayed
on screen during playback*.
Note 44
:
TA and NEWS announcements may
interrupt CD playback.
Ejecting CD from the CD Player
1- Press REL to open the front.
2- Press the
key.
3- Close the front.
Note
:
In eject error case, the CD is reloaded.
Loading CD in the CD changer
If a CD changer is connected, you can use the
following function (for more information
about the CD changer, see your dealer).
1- Check that the CD magazine is loaded.
2- Select CD CHANGER with the SOURCE
key: playback of the first CD begins.
3- Select the CD required with the
keys:
the playback of the CD begins.
Note 11
:
The Information is displayed on screen
as for the CD Player.
- If the magazine is not in place, the screen
displays INSERT MAG.
- If the magazine is empty, the screen displays
INSERT DISC.
Note 22
:
TA and NEWS announcements may
interrupt CD playback.
Note 33
:
At the end of the disc, the next disc is
automatically played : any disc missing from
the magazine is automatically disregarded.
Ejecting CD from the CD changer
1- Press OPEN to open the front.
2- Press the
key.
3- Close the front.
Note
:
In eject error case, the CD is reloaded.
Listening to MP3 files*
All VDO Dayton are ISO/DIN compliant, ma-
king them an easy fit in most dashboards.
So, you are able to listen to MP3 files burned
on a CD-R or CD-RW disc in ISO9660 format
(level 2, 32 characters), Mac or Linux.
!
!
En
gl
ish
CD, CDC OR MP3 PLAYER*
* Depending on radio reference: see table at the end
AN 2001 2L gb.qxd 16/07/01 14:54 Page 13