VBrick 7000 Series, Getting Started Manual

Page: 42 / 78

32 © 2009 VBrick Systems, Inc.
T
To login to VBAdmin
1. Enter the IP address of the H.264 appliance in the address bar.
2. When the login page is displayed, login to VBAdmin with a valid user name and
password (case-sensitive), and then click the
Log In
button. The default user name and
password is
admin
and
admin
. It is highly recommended that you use the
Maintenance
pages in VBAdmin to change the user name and password. The user name and password
cannot exceed 20 characters. It may include any combination of alphanumeric characters
and only the following special characters:
~ ! # $ ^ * + & [ ] { } | < >
Table 12. Default Passwords and Privileges
Home Page
A successful login displays the Welcome to VBAdmin page shown below. This is the "home"
page; it provides system information and the colored LEDs in the middle of the page give
you a quick snapshot of the health and status of the appliance.
Figure 11. Welcome Page
User Level Default User Name Default Password Privileges
Administrator admin admin Read, diagnostics, edit, change
passwords.
Operator operator operator Read, diagnostics, edit.
Diagnostics diagnostics diagnostics Read, diagnostics.
Public public public Read.