VBOATS VOYAGER, Operating Manual

Page: 18 / 72

18
Warranty service for aluminum boats VBOATS is
provided by the manufacturer through its network
of dealerships.
The manufacturer shall, within the warranty period,
eliminate any defects in the product that occurred
prior to its transfer to the buyer (i.e. resulting from a
material defect or poor manufacturing and assembly),
subject to the following conditions:
» the product has a genuine case identification num -
ber (HIN) assigned by the manufacturer;
» the boat was operated in accordance with the
manufacturer’s recommendations set out in the user’s
Manual.
» The warranty is limited only to manufacturing de-
fects and does not apply to the following cases:
» use of Products in sporting events (other than
Products specifically designed for this purpose);
» installation of components and additional equip -
ment that are not approved by the manufacturer, as
well as non-original spare parts that could cause a
malfunction;
» use of low-quality fuel;
» abuse, neglect or use of the product for the pur-
poses for which it is not intended;
» violation of the manufacturer’s rules and recom-
mendations for the operation of the Product and/or its
components, as set out in the user’s Manual and other
regulatory documents related to the Product compo-
nents;
» the presence of damage that occurred as a result of
an accident, collision, flooding, fire or natural disaster;
» modification of the Product and/or its components,
violation of adjustments that may cause a defect;
» performing maintenance and repairs not by special-
ists of service stations authorized dealers;
» damage that appeared during transportation;
» discoloration, damage, corrosion, or deterioration
of the appearance, quality of components due to at -
mospheric exposure or natural wear;
» damage or deletion of the HIN, motor, etc .;
» ncorrect preparation of Products for use (for ex -
ample, incorrect installation of an outboard motor on
a boat, in the case of self-installation of the motor by
the final owner and/or dealer, etc.);
» growth of microorganisms on Product parts that
are in the water.
Due to the specifics of the production technology and
manual welding of the thin sheet rolled aluminum
EN
Warranty