VBOATS VOYAGER, Operating Manual

Page: 15 / 72

15
EN
Electrical equipment
Install the motor and additional equipment, as well as
service electrical equipment only in specialized service
centers.
If you leave the boat for a long time, turn off the
power with the main switch.
Also turn off the power when working with electricity.
The automatic pump for below-deck water, however,
will work (if it is available in the factory configura -
tion). It can only be disabled by removing the battery
terminals. When removing or installing batteries, do
not allow a metal key to simultaneously touch both
battery poles or aluminum parts of the boat.
Charge the battery only from the motor or battery
charger. Charging at too high current can be explosive
for the battery.
ATTENTION! Never disconnect power from the
main switch while the motor is running.
Do not change the boat’s electrical system or its
drawings; changes and maintenance must be per -
formed by a qualified technician
Do not install devices whose current consumption
exceeds the rated current of the electrical system.
The total current consumption of electrical devices
and additional equipment connected to the power
circuit of the terminal block must not exceed 10A.
The standard 12V socket is not intended for use with
cigarette lighters. The current consumption of de-
vices connected to it must not exceed 10A.
If you decide to install a sound signal (horn), you can
use the wiring of the boat, provided that the current
consumption of the installed device is less than 5A.
It is strictly forbidden to install fuses with wrong cur-
rent rate.
Electrical diagrams are subject to change without
notice.
Circuit diagrams for electric systems are included as
separate printed sheets attachments to this owner
manual.
Depending on the configuration, the composition of
electrical equipment may change.