5
Use & Function/How to Operate
4. How to Operate
IMPORTANT
: Switch off the brushbar to obtain the best
results on smooth surfaces and hard floors.
NOTE:
The brushbar is automatically switched off when it
is the vertically parked position.
1.
Switch the vacuum cleaner on by pressing the power
on/off switch (Fig.4/1). Press the switch again to turn
the cleaner off.
2. Place foot onto vacuum cleaner head and at the same
time tilt the vacuum cleaner back to start vacuuming
(Fig.4/2). The handle can be lowered to provide a low
profile to fit under furniture. For vacuuming on different
surfaces, the brushbar automatically adjusts to the
surface.
3. The brushbar is switched on/off using the brushbar
on/off switch located on the handle (Fig.4/3). The
edge-to-edge brushbar picks up dirt right up to the
skirting boards (Fig.4/3A).
2.
To store the accessories, flip-down the
accessories holder at the back of the cleaner
(Fig.3/2).
3. Attach the crevice tool and stair cleaning tool
(Fig.3/3).
4. Push in the accessories holder (Fig.3/4).
IMPORTANT
: Once all of the attachments are in
place unwind the cable fully and insert the plug into
a wall outlet. For easier handling while vacuuming,
hook the power cord into the cord clip.
Fig.4/1
Fig.3/2
Fig.4/2
Fig.4/3
Fig.3/3
Fig.3/4
Fig.4/3A
2. Safety Information
FOR HOUSEHOLD USE ONLY.
When using the vacuum cleaner, basic safety precautions
should always be observed, including the following:
1.
Only use the vacuum cleaner indoors on dry
surfaces.
2.
Turn off the vacuum cleaner controls before
connecting to or disconnecting from the mains
supply.
3.
Always unplug the vacuum cleaner before
connecting or disconnecting the vacuum hose.
4.
Use only as described in this manual. Use only the
manufacturer’s recommended attachments.
5.
Close attention is necessary when used by or near
children. Do not allow children to use as a toy.
6. Do not use the vacuum cleaner with a damaged
cord or plug. Do not use the vacuum cleaner if it
has been dropped, damaged, left outdoors or
dropped into water. Return the vacuum cleaner to
a Vax Authorised Service Agent or suitably
qualified person for examination, repair or
adjustment.
7. Do not pull or carry by the cord. Do not use the
cord as a handle, close a door on the cord or pull
the cord around sharp edges or corners. Do not
run the vacuum cleaner over the cord. Keep the
cord away from heated surfaces.
8.
Do not handle the plug or vacuum cleaner with wet
hands. Do not use outdoors or on wet surfaces.
9.
Do not put any objects into openings. Do not use
with any openings blocked and do not restrict air
flow. Keep all openings free of dust, lint, hair or
anything that may reduce airflow.
10. Keep hair, loose clothing, fingers and all parts of
the body away from openings and moving parts.
11. Do not pick up hot coals, cigarette butts, matches
or any hot, smoking or burning objects.
12. Do not pick up flammable or combustible materials
(lighter fluid, petrol, kerosene, etc) or use in the
presence of explosive liquids or vapours.
13. Do not vacuum up harmful or toxic material
(chlorine bleach, ammonia, drain cleaner, etc).
14. Do not vacuum up hard or sharp objects such as
glass, nails, screws, coins, etc.
15. Do not use without the filters in place.
16. Use extra care when vacuuming on stairs.
17. Keep vacuuming area well lit.
18. Store the vacuum indoors in a cool, dry area.
Safety Information/Use & Function
3. Use & Function
4
19. Turn off the switch before unplugging.
20. Use only CE-approved 13 amp extension cords.
Non-approved extension cords may overheat.
Care should be taken to arrange the cord so that
the cord cannot be pulled or tripped over.
WARNING:
Always switch off and unplug the vacuum
cleaner from the electrical outlet before assembling,
opening or emptying the dirt container, or before
connecting/disconnecting the attachments.
CAUTION:
The vacuum cleaner is a very powerful unit.
Before plugging the cord into the outlet make sure the
switch is in the ‘off’ position. Hold the vacuum cleaner
firmly when starting and in use.
IMPORTANT:
If the vacuum inlet or hose is blocked,
switch off the vacuum cleaner and remove the
blockage(s) before re-starting the vacuum cleaner.
IMPORTANT:
Cleaning filters regularly improves
vacuum performance. Make sure all filters are replaced
back into the vacuum cleaner before using.
This vacuum cleaner is intended for household use
only and not for commercial or industrial use.
PLEASE KEEP THESE INSTRUCTIONS FOR
FURTHER USE.
IMPORTANT:
Always remove the power plug from the
electrical outlet before assembling or removing
accessories.
1. Push the bottom end of the stretch hose tube on to
the opening at the bottom of the vacuum cleaner
(Fig.3/1). Push the tube handle towards the vacuum
cleaner until it clicks into place (Fig.3/1A).
Fig.3/1
Fig.3/1A
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 4
