Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 137 / 293

136

Lighting

With the light switch in position

AUTO all lighting functions are

available.
The following functions are available

also with light switch in position

■ Dynamic curve lighting
■ Corner lighting
■ Reversing function
■ Dynamic automatic headlight

levelling

Playstreet lighting

Activated automatically at low speed

up to approx. 20 mph. The light beam

is turned at an angle of 8° to the

roadside.

Town lighting

Activated automatically at a speed

range between approx. 25 and

34 mph and when street lights are

detected by the light sensor. The light

range is reduced by an extended light

distribution.

Country lighting

Activated automatically at a speed

range between approx. 34 and

70 mph. The beam of light and the

brightness is different between the

left and the right side.

Motorway lighting

Activated automatically at a speed

above approx. 70 mph and minimal

steering movements. It switches on

after a delay or directly when the

vehicle is powerfully accelerated. The

light beam is longer and brighter.

Adverse weather lighting

Activated automatically up to a speed

of approx. 43 mph, when the rain

sensor recognises condensation or

the wiper operates continuously. The

range, distribution and light intensity

is regulated variably depending on

visibility.

Dynamic curve lighting

The light beam pivots based on

steering wheel angle and speed,

improving lighting in curves.
Control indicator

113.

Corner lighting

On tight bends or when turning off,

depending on the steering angle or

the turn signal light, an additional left

or right reflector is switched on which

illuminates the road at an right angle

to the direction of travel. It is activated

up to a speed of 25 mph.

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands