Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 180 / 293

Driving and operating

179

The selected following distance is

indicated by filled distance bars on

the adaptive cruise control page.
Note that the following distance

setting is shared with the sensitivity

setting of forward collision alert.
Example: If setting 3 (far) is selected,

then the driver is warned sooner

before a possible collision, also if

adaptive cruise control is inactive or

switched off.

Warning

The driver accepts full

responsibility for the appropriate

following distance based on traffic,

weather and visibility conditions.

Following distance must be

adjusted or the system switched

off when required by the prevailing

conditions.

Detecting the vehicle ahead

The green illuminated "vehicle

ahead" control indicator

displayed in the speedometer when

the system detects a vehicle in the

driving path.
If this symbol does not display, or

displays briefly, adaptive cruise

control will not respond to vehicles

ahead.

Deactivation

Adaptive cruise control is deactivated

by the driver when:

■ button

is pressed,

■ brake pedal is applied,
■ clutch pedal is depressed for more

than four seconds,

■ gear selector lever of automatic

transmission is moved to N.

The system is also automatically

deactivated when:

■ vehicle speed slows down below

28 mph or accelerates above

120 mph,

■ Traction Control system is

operating for more than

20 seconds,

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands