Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 216 / 293

Driving and operating

215

Insert the tensioned coupling ball bar

in the opening and push firmly

upwards until it audibly engages.
The rotary handle snaps back into its

original position resting against the

coupling ball bar without a gap.

Warning

Do not touch rotary handle during

insertion.

Lock the coupling ball bar by turning

the key to position

. Remove the key

and close the protective flap.

Eye for break-away stopping cable

Attach breakaway stopping cable to

eye.

Check that the coupling ball bar is

correctly installed

■ Green marking on rotary knob must

point towards green marking on

coupling ball bar.

■ There must be no gap between the

rotary handle and the coupling ball

bar.

■ The coupling ball bar must be firmly

engaged in the opening.

■ The coupling ball bar must be

locked and the key removed.

Warning

Towing a trailer is permitted only

when a coupling ball bar is fitted

correctly. If the coupling ball bar

does not engage correctly, seek

the assistance of a workshop.

Dismounting the coupling ball

bar

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands