Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 184 / 293

Driving and operating

183

Vehicle messages

120.

Forward collision alert

The forward collision alert can help to

avoid or reduce the damage caused

by front-end crashes.

A vehicle ahead is indicated by a

control indicator

If a vehicle directly ahead is

approached too quickly, a warning

chime and alert in the Driver

Information Centre is provided.
A precondition is that forward collision

alert is activated in the vehicle

personalisation menu

127 or that it

is not deactivated by the button

(depending on the system, see

following).
Depending on the vehicle's

equipment, there are two variants of

the forward collision alert available:

■ Forward collision alert based on

radar system

on vehicles equipped with adaptive

cruise control

176.

■ Forward collision alert based on

front camera system
on vehicles with traditional cruise

control or none

173.

Forward collision alert based on

radar system

The system uses the radar sensor

behind the radiator grille to detect a

vehicle directly ahead, in your path,

within a distance of max. 150 metres.

Activation

Forward collision alert operates

automatically above walking speed,

provided that Auto collision

preparation setting is not deactivated

in the vehicle personalisation menu

127.

Selecting the alert sensitivity

The alert sensitivity can be set to

near, medium or far.

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands