Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 214 / 293

Driving and operating

213

The permissible gross train weight

must not be exceeded. This weight is

specified on the identification plate

266.

Vertical coupling load

The vertical coupling load is the load

exerted by the trailer on the coupling

ball. It can be varied by changing the

weight distribution when loading the

trailer.
The maximum permissible vertical

coupling load (75 kg)

is specified on

the towing equipment identification

plate and in the vehicle documents.

Always aim for the maximum load,

especially in the case of heavy

trailers. The vertical coupling load

should never fall below 25 kg.

Rear axle load

When the trailer is coupled and the

towing vehicle fully loaded, the

permissible rear axle load (see

identification plate or vehicle

documents) may be exceeded by

60 kg, the gross vehicle weight rating

may be exceeded by 60 kg. If the

permissible rear axle load is

exceeded, a maximum speed of

60 mph applies.

Towing equipment

Caution

When operating without a trailer,

remove the coupling ball bar.

Stowage of coupling ball bar

The bag with the coupling ball bar is

stowed in the load compartment.
Place the strap through the right rear

lashing eye, wrap around twice and

tighten the strap to secure the bag.

Engine B16DTH: Depending on the equipment the maximum permissible vertical coupling load can be 75 kg or 60 kg.

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands