Vauxhall 2014 Zafira Tourer Owner'S Manual Download

Page: 179 / 293

178

Driving and operating

Once the system is activated,

adaptive cruise control decelerates or

brakes if it detects a vehicle ahead

which is slower or closer than the

desired following distance.

Warning

Accelerating by the driver

deactivates automatic braking by

the system. This is indicated as a

pop-up warning in the Driver

Information Centre.

Increase speed

With adaptive cruise control active,

hold thumb wheel turned to RES/+:

speed increases continuously in large

increments, or activate repeatedly

RES/+: speed increases in small

increments.
If the vehicle is driven with adaptive

cruise control active much faster than

the desired speed, e.g. after

depressing the accelerator pedal,

then the current speed can be stored

and maintained by turning the thumb

wheel to SET/-.

Reduce speed

With adaptive cruise control active,

hold thumb wheel turned to SET/-:

speed decreases continuously in

large increments, or activate

repeatedly SET/-: speed decreases in

small increments.
With adaptive cruise control active, if

the vehicle is driven much slower than

the desired speed, e.g. because of a

slower vehicle ahead, then the

current speed can be stored and

maintained by turning the thumb

wheel to SET/-.

Resume stored speed

If the system is switched on but

inactive, then turn thumb wheel to

RES/+ at a speed above 30 mph to

resume the stored speed.

Setting the following distance

When adaptive cruise control detects

a slower moving vehicle in the driving

path, it will adjust the vehicle speed to

maintain the following distance

selected by the driver.

The following distance can be set to

near, medium or far.

Press button

, the current setting is

shown on the Driver Information

Centre. Press button

again to

change the following distance. The

setting is also displayed in the top line

of the Driver Information Centre.

Summary of Contents for 2014 Zafira Tourer






































































































































































































































































































Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands

Vauxhall 2014 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2014 Zafira Tourer

Reviews:

Related manuals for 2014 Zafira Tourer

Brands by name

Popular brands