134
Self-help, vehicle care
7. Screw in the wheel bolts. Push the wheel
bolt w rench
3
on as far a s possible and
tighten the w heel bolts slightly.
On some versions, the wheel trim m ust
be positioned before the wheel bolts
are tig htened.
8. Lower vehic le.
9. Push the wheel bolt wrench
3
on as far
as possib le and tig hten crosswise.
Tightening torque is 110 Nm.
Alloy wheels
3
: put hub cap on a nd
engage, inserting pin on rear of hub
ca p into required hole in wheel.
Alloy wheels with anti-theft lock
3
: Put
hub ca p on. Insert and tighten anti-
theft lock
3
.
10.Before refitting the w heel trim, clean the
wheel around the retaining clips. Valv e
sym bol
3
on back of wheel trim must
point towards va lv e on wheel.
Align and engage hub cap or wheel
trim
3
and wheel b olt caps
3
.
11. Stow the replac ed w heel, tools and
warning triangle
3
126,
3
129.
12. Check the tyre pressure of the newly
mounted w heel.
13. Have the wheel bolt tightening torque
(110 Nm ) checked.
14. Replace the faulty tyre on the wheel
that was rem oved.
Summary of Contents for 2013 Combo
Page 4: ......
Page 12: ...8 In Brief...
