150
Self-help, vehicle care
Tail lights
1. Disenga ge c ov er by pressing retaining
lugs and remove.
2. Deta ch plug connector from bulb
mounting .
3. Grip the bulb housing from the outside,
slacken the two knurled nuts using the
wheel bolt spanner
3
and unscrew by
hand.
4. Deta ch bulb housing.
5. Press retaining lugs on bulb mounting
together and rem ov e bulb m ounting, as
shown in Fig. 13726 S.
Lights from top to bottom:
6. Remov e bulb from socket.
7. Insert a new bulb. Engage the bulb
mounting in the bulb housing. Insert the
bulb housing into the vehicle b od y.
Screw the fixing nuts onto setscrews by
ha nd and tighten. Engage the plug
connector. Place the cover in position
and close.
Reversing light/brak e light
Turn signal lig ht
Reversing light
Fog tail light (country-specific version:
fog tail light a t one side only).
Summary of Contents for 2013 Combo
Page 4: ......
Page 12: ...8 In Brief...
