137
Self-help, vehicle care
If the p rescrib ed tyre p ressure is not
reached within 10 m inutes, remove the
tyre repair k it. Move the v ehicle b y one
tyre rotation. Attach the tyre repair k it
again and c ontinue the filling
procedure for 10 minutes. If the
prescribed tyre pressure is still not
reached, the tyre is too da maged to
repair. Contact a w ork shop.
Drain excess tyre pressure with the
button over the pressure indicator.
Do not run the com pressor for more
than 10 minutes - see "Imp ortant
information"
3
138.
15.Detach the tyre repair kit. Screw the
filler hose to the free connection on the
sea lant bottle. This prev ents sealant
leakage. Stow the tyre repair kit in the
load compartment.
16.Wipe away any sea la nt spill with a
cloth.
17.Colla pse the warning triangle and stow
it in the load compa rtm ent or stow age
com partment
3
126.
18.Tak e the supplied sticker indica ting
m aximum p ermitted sp eed and affix
it in the driver’s field of view.
19.Continue driving immediately to allow
the sealant to distrib ute evenly
throughout the tyre. Stop after approx.
6 miles (10 km ) but no more than 10
m inutes and chec k tyre pressure. Screw
the compressor air hose directly onto
the tyre valve - see Fig. 15798 T.
If tyre pressure is more tha n 19 psi
(1.3 bar), a djust to the prescribed v alue.
Repeat the procedure until there is no
more pressure loss.
If the tyre p ressure ha s d ropp ed b elow
19 psi (1.3 bar), the v ehicle must not be
used. Conta ct a workshop for
assistance.
20. Stow the tyre repair k it
3
135.
Summary of Contents for 2013 Combo
Page 4: ......
Page 12: ...8 In Brief...
